Sometimes blasters require a slight adjustment depending on how they arrive. If you notice any cracked parts or dislodged parts, don’t fire until you’ve put them back.
Always email us with any questions! We replace anything damaged in shipping.
If no dart comes out of the blaster, you might think that pulling the trigger harder and more will help.
PULLING THE TRIGGER HARDER WILL NOT HELP!
Stop firing immediately!
If not dart comes out, it’s probably because you have a jam.
Remove the mag, clear the jam, then continue firing 🙂
*If you continue to fire without first clearing the jam, you risk burning out the motors*
Remove the magazine.
Look down the barrel or up the magwell to see if you can see a jammed dart.
If so, poke the dart out with a stick or other slender object by inserting the stick or object down the barrel from the front.
The squished dart should fall out the magwell.
You’re good to go!
Make sure the rev trigger is pulled and the motors and wheels are revving fully before pulling the fire trigger.
Pull the fire trigger all the way back to fire a dart. Let go of the trigger and let it fully reset before firing again.
If you understand how the trigger feels, you’ll be much more likely to get good performance out of your blaster.
The Gryphon is such a fun blaster. You’re lucky to get one 😀
