Info About Your Worker Nightingale
Flywheel blasters can be very different than normal blasters, so please read this whole thing before firing!!
*IMPORTANT!*
#1: Stop revving IMMEDIATELY if no dart comes out
#1: Stop revving IMMEDIATELY if no dart comes out
If no dart comes out of the blaster, you might think that pulling the trigger harder and more will help.
PULLING THE TRIGGER HARDER WILL NOT HELP!
Stop firing immediately!
If not dart comes out, it’s probably because you have a jam.
Remove the mag, clear the jam, then continue firing 🙂
*If you continue to fire without first clearing the jam, you risk burning out the motors*
How to clear a jam the easy way:
Remove the magazine.
Look down the barrel or up the magwell to see if you can see a jammed dart.
If so, poke the dart out with a stick or other slender object by inserting the stick or object down the barrel from the front.
The squished dart should fall out the magwell.
You’re good to go!
#2: Get used to the trigger pull before firing rapidly
Make sure the motors and wheels are revving fully before pulling the trigger the rest of the way.
Pull the trigger all the way back to fire a dart. Let go of the trigger partially and let the pusher reset before firing again.
If you understand how the trigger feels, you’ll be much more likely to get good performance out of your blaster.
#3: How to Charge a Lipo Battery
#4: Have a TON of fun
The Nightingale is such a fun blaster. You’re lucky to get one 😀
