Lepus DIY Kit – Blue & White


Includes all of the parts needed to build your own Lepus. An extremely compact, mag-in-handle, full auto blaster designed by JackRabbitNerfer. Darts, battery & magazines must be selected separately below.

Out of stock


General Info:
– Includes all of the 3D printed and hardware parts needed to build your own Lepus. Assembly required.
– Fully automatic with two trigger setup. One revs the wheels, the second fires.
– Fire switch will only activate after rev switch is activated to prevent jams and accidental firing
– Extremely compact (6″ x 6″ x 2-1/2″)
– Mag in handle design with pull-release system
– Variable rate of fire. Default configuration fires about 1 mag per half-second or 30 darts per second
– Powered by Fang ReVamped motors by Foamblast and Worker Hurricane Flywheels by Worker Mod
– N20 600rpm pusher motor makes for reliable single fire and controlled full auto fire.
– Performance on-par with similar builds (Hurricane, Bulwark, Woozi, etc) (~130 FPS)
– Battery compartment dimensions are: 58mmx15mmx43mm

Darts & Loading:
– Compatible with Talon, Thanhlon, and other Talon style magazines
– Medium crush (32.5mm) means will work with most dart types, but recommended darts are the Half-length Adventure Force darts.

Battery & Charger: 
– Rear thumbscrew for quick access to battery cover and internals
– Compatible with small 3s Lipo batteries (Tattu 450mAh recommended).
– NOT compatible with 1300 or 1500mAh batteries.
– Wired with JST connector for compact size
-Battery Charger: IMAX B6 Lipo Battery Charger

Additional Motor Setup
Magnetic Pop-Loc Holster


View a color configurator here: Lepus Color Configurator

View the build guide here: Lepus Build Guide

Jackrabbitnerfer originally designed the Lepus to be a full-auto sidearm for his Caliburn or HPA blaster.

**Original design by JackRabbitNerfer on Etsy. Sold with permission.

Additional information

Weight .25 lbs
Dimensions 6.5 × 6.5 × 3 in