Main Power Spring

(3 customer reviews)

$4.00

Springs for a variety of blasters. Longshot Sized springs available here.

For Caliburn like blasters, order full length.

For Talon Claw, Lynx, T4, etc, order Talon Claw length. You will receive a v4 TC length spring. Specify in notes if you’d like it pre-cut to a different length.

K31 (4kg) (11'' Length) (90 - 130 FPS)
788 (8kg) (10'' Length) (140 - 165 FPS)
K25 (11kg) (11'' Length) (185 - 210 FPS)
K26 (14kg) (11'' Length) (200 - 250 FPS)
K14 (22kg) (11'' Length) (260 - 300 FPS)
788 & K25 are Closed Ends
K31 (4kg) (9'' Length) (90 - 130 FPS)
788 (8kg) (6'' Length) (140 - 165 FPS)
K25 (11kg) (8-3/8'' Length) (185 - 210 FPS)
K26 (14kg) (9'' Length) (200 - 250 FPS)
788 & K25 are Closed on One End

Description

Features
– Talon Claw springs will be sized to fit in a v4 Talon Claw with the most recent plunger version (v5) (aprox 9″ k26 and k31 and 8-3/8” for k25, and 6″ for 788) unless requested otherwise
– Listing of springs are from weakest to strongest
– All performance numbers are based on average setups. Results may vary.
– K31 stacks inside of K25 and 788

– kg type springs are genuine Turf Blaster Springs

Specs
K31: Spring-Tempered Steel, 11″ Long, 0.781″ OD, 0.657″ ID
788: 302 Stainless Steel, 10″ Long, 0.968″ OD, 0.808″ ID. CLOSED ends.
K25: Spring-Tempered Steel, 11″ Long, 0.969″ OD, 0.809″ ID
K26: Spring-Tempered Steel, 11″ Long, 0.844″ OD, 0.684″ ID
K14: Spring-Tempered Steel, 11″ Long, 1.094″ OD, 0.884″ ID

** K14 should only be used with sufficient metal upgrade reinforcements

Additional information

Weight 0.20625 lbs
Dimensions 10 × .5 × .5 in

3 reviews for Main Power Spring

  1. Erik McKenney (verified owner)

    The Caliburn is working even better than we hoped and we’ll be ordering some upgrade parts shortly. 5/5 would definitely be my review score.

  2. Collin M. (verified owner)

    Springs are springy, nailed it! Got a K25, 788, and K31. All came and work as expected, thank you!

  3. Daniel (verified owner)

    This is a great spring for my Caliburn! However, the K31 is a tight fit and it scratches the plunger rod a bit. But the K25 works fantastic!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…