Spectre HPA SniperCORE

US$275.00

A high-pressure airtank by Spectre Blasters. The HPA core is the powerhouse behind many HPA builds.

Allows for semi-auto and full-auto firing (with relay) of air-powered blasters.

-

Categories: HPA Hardware and Parts, HPA Tanks, Cores & Regulators, HPA Tools and Accessories, Other Parts, packing, Parts and Hardware, Ready to Ship, resale and ready-to-ship, HPA (High Pressure Air), HPA Hardware and Fittings, New Products, Supplies and Materials

Features:
– Operating pressure range: 60 – 145 psi
– Inlet port: 1/8″ BSPP
– Barrel requirement 16mm (“Worker” thread)
– Optimal performance: 200 fps at 100 psi
– 280+ FPS possible
– Dimensions: 38.1mm body diameter, 97mm long. 6mm stickout at the back, 18mm diameter. Bolt size 12.7mm, total stroke length 57mm.
– Normally open bolt means you can reload and unload a magazine in the blaster’s default state
– Compatible with a Caliburn chambered barrel

 

Includes:
– SniperCORE
– SniperCORE Barrel Receiver

High pressure air systems are inherently dangerous and should only be attempted by those confident with such systems. Frontline Foam is not responsible for any injury or damage caused by user error.

[spacer height=”40px”]

Weight .5 lbs
Dimensions 8 × 4 × 4 in

Reviews

There are no reviews yet

Be the first to review “Spectre HPA SniperCORE”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
Spectre HPA SniperCORE Spectre HPA SniperCORE
Your question
* Question is required
Name
* Name is required
What is the length of the barrel threaded breech that is included? Rob asked on June 18, 2026

The total length of the Brass Barrel Receiver is Approximately 48mm.

-Derrikk

 Derrikk Sun answered on September 29, 2026 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required
What size is the plunger? Does it fit in a Caliburn chambered barrel? How many millimeters is the recommended receiver if not? Grant Lott asked on August 24, 2025

Yes it does fit in the Caliburn chambered barrel!!

 Frontline Foam answered on August 27, 2025 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required
Will the sniper core work fine in all already existing HPA builds. More specifically the ADHD body. Thanks 👍 Adam asked on July 24, 2025

Good questions! Yup! It's designed to be cross-compatible with existing SuperCORE builds. Let us know if you experience any hiccups though!

 Derrikk Sun answered on July 24, 2025 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required
Can it fit in any blaster? I wish to use it in a Nerf Rival Fate. Derek Wootson asked on June 6, 2025

Hi! It cannot fit into any blaster, for the Rival fate it would be too big!

 Frontline Foam answered on June 6, 2025 store manager

It could fit in any blaster with modification, but the Fate is a bit too small to fit this Core without parts of it sticking it. The blaster you put it into would ideally be larger than the Core.

 Derrikk Sun answered on July 24, 2025 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required
Hello, I was wondering if this would work with a worker 550mm barrel and also does this have to use a mjvo-3 or can it just be ant normally open valve Bennett E asked on April 11, 2025

Yup! It works with the same Worker-type threading. I believe the MJVO is normally open already. But either way, yes, it can be used with both valve types.

-Derrikk

 Derrikk Sun answered on October 8, 2026 store manager
(0) (0)
Add an answer
Your answer
* Answer is required
Name
* Name is required